Details
2005+ Ford Super Duty Knuckle Bolt Kit Passenger Side High Steer Arms
FEATURES:
3/4" - 16 tpi 8" long Grade 8 bolt
3/4" - 16 tpi All-steel Mechanical Lock nut*
Machined 1.25" OD - .250" wall DOM sleeve with tapered sleeve for top of knuckle
Tapered Stainless Steel Spacer for bottom of knuckle
Increases overall knuckle and steering strength
Cut middle section out for mounting 3/4" heim in DOUBLE SHEER**
Choose your tie rod mounting height
For increased strength, sleeve can be welded to knuckle
IMPORTANT NOTES:
NOTE: This kit only works on 05+ Superduty Axles not necessarily in the Superduty itself. This is intended for use with our Double Shear Superduty High Steer arms (HS6120, HS6121, HS6122) NOT our normal Superduty High Steer Arms. Refer to ACCESSORIES below for compatible products.
Factory tie rod end hole on the DRIVER SIDE knuckle will need to be drilled to a 3/4" hole for this kit to work. Tapered end of driver side sleeve will need to be cut off as well since the top of the hole is not tapered.**
To clear differential cover, the Tie Rod must have two bends in it, similar to the OEM tie rod, when used with this knuckle bolt
Additional Information
MPN | HS6085 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | Artec Industries | ||||||||||||
Brand | Artec Industries | ||||||||||||
UPC | 816791026842 | ||||||||||||
ISBN/ASIN | Does not apply | ||||||||||||
Condition | NEW | ||||||||||||
Condition Description | No | ||||||||||||
Price Comparison |
|
||||||||||||
Country of Manufacture |